1 FOUR SELECTABLE D.C. RANGES 200 A, 2 mA, 20 mA, 200 mA MINIMUM AND MAXIMUM DISPLAY CAPTURE LCD, REFLECTIVE OR RED/GREEN LED BACKLIGHTING 0.
Enter the reset action of the output. See figure for details.Auto = Automatic action; This action allows the output to automatically reset off at the
116.5 MODULE 5 - SERIAL SETUP PARAMETERS (5-SEr)LIMITED WARRANTYThe Company warrants the products it manufactures against defects in materials and wo
Setpoint ActionSetpoint SelectSetpoint ValueOutput Reset ActionHysteresis ValueOff Time DelayOn Time DelayOutput Reset W/Display ResetChange Display
1. DISPLAY: 5 digit LCD 0.48" (12.2 mm) high digitsCUB5IR00: Reflective LCD with full viewing angleCUB5IB00: Transmissive LCD with selectable red
3ADDING OPTION CARDSThe CUB5 meters can be fitted with optional output cards and/or serial communications cards. The details for the plug-in cards can
WIRING OVERVIEWElectrical connections are made via screw-clamp terminals located on the back of the meter. All conductors should conform to the meter’
COMMINP +MODEL INPUT POWER:OUTPUT POWER:85-250 VAC, 50/60Hz, 14VAOPERATING TEMP: 0° TO 60°C12VDC UNREG. @ 400mA+12VDC COMMONM3424BTERMINALAC I
65.0 REVIEWING THE FRONT BUTTONS AND DISPLAYSEL RSTPROGRAMMING MODE ENTRY (SEL BUTTON)It is recommended all programming changes be made off line, or b
Display DecimalPointFilter SettingFilter BandInput Value for Scaling Point 1Display Value For Scaling Point 1User Input AssignmentInput RangeSELrANGEd
Entering Code 66 will overwrite all user settings with the factory settings. The meter will display rESEt and then return to CodE 00. Press the SEL bu
9The Security Code determines the programming mode and the accessibility of programming parameters. This code can be used along with the Program Mode
Kommentare zu diesen Handbüchern