Red-lion MLPS2 Bedienungsanleitung PDF herunterladen

MLPS UNIT

MOUNTING CLIP

EXISTING PANEL

1.30 (33)

SEE APPROPRIATE LITERATURE

M3424B

OUTPUT POWER:

12VDC UNREG.  @ 400mA

OPERATING TEMP: 0° TO 60°C

85-250 VAC, 50/60Hz, 14VA

DC COMMON

INPUT POWER:

AC INPUT

TERMINAL

+12V

MLPS1

MODEL

YORK, PA. MADE IN U.S.A.

RED LION CONTROLS

2.65 (67.3)

FOR UNIT DIMENSIONS

CUB5 - 2.96 (75.2)

CUB4, DT8 - 2.60 (66.0)

1.85 (47)



PROVIDES POWER FOR THE MICRO-LINE SERIES



MLPS1: 12 VDC OUTPUT @ 400 mA



MLPS2: 24 VDC OUTPUT @ 200 mA



EASILY ATTACHED TO BACK OF DT8, CUB4 AND CUB5

DESCRIPTION

The Model MLPS power supplies are designed to attach to the rear of the

Micro-Line Series. The MLPS1 provides a 12 VDC output, while the MLPS2

provides a 24 VDC output. Both supplies can be powered from an 85-250 VAC

source.

Caution: The maximum output current of the MLPS1 is 400 mA and the MLPS2

is 200 mA. Check the specifications of the specific counter(s)/indicators(s)

and sensors(s) being used to ensure that total current requirements do not

exceed the respective values of the power supplies.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

manual or on equipment must be observed to ensure personal safety and to

prevent damage to either the instrument or equipment connected to it. If

equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

MODEL MLPS1 and MLPS2 - MICRO-LINE POWER SUPPLIES

DIMENSIONS In inches (mm)

SPECIFICATIONS

1. POWER REQUIREMENTS: 85-250 VAC, 50/60 Hz, 14 VA.

2. POWER OUTPUT:

MLPS1: +16 VDC max @ 4 mA; 11.5 VDC min @ 400 mA

MLPS2: +26 VDC max @ 0 mA; 22 VDC min @ 200 mA

3. ENVIRONMENTAL CONDITIONS:

Operating Temperature: 0 to 60°C

Storage Temperature: -30 to 75°C

Operating and Storage Humidity: 85% max. (non-condensing) from 0°C

to 50°C.

Altitude: Up to 2000 meters

4. CERTIFICATIONS AND COMPLIANCES:

SAFETY

UL Recognized Component, File # E179259, UL61010-1, CAN/CSA-

C22.2 No. 61010-1

Recognized to U.S. and Canadian requirements under the Component

Recognition Program of Underwriters Laboratories, Inc.

Output meets Class 2 power requirements per UL 1310.

IECEE CB Scheme Test Report # E179259-V2-S1

Issued by Underwriters Laboratories, Inc.

IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment

for measurement, control, and laboratory use, Part 1.

ELECTROMAGNETIC COMPATIBILITY

Emissions and Immunity to EN 61326: Electrical Equipment for

Measurement, Control and Laboratory use.

Notes:

1. Criterion A: Normal operation within specified limits.

2. Criterion B: Temporary loss of performance from which the unit self-

recovers.

5. CONSTRUCTION: High impact black plastic. Mounting hardware

included. Installation Category II, Pollution Degree 2.

6. CONNECTION: Two position terminal block which accepts one 14 AWG

wire (torque terminal screws to 5 inch-lbs. [0.56 N-m]).

7. WEIGHT: 2 oz (47 g)

Bulletin No. MLPS1-D

Drawing No. LP0582

Released 03/10

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

MODEL NO. DESCRIPTION PART NUMBER

MLPS2

MLPS1

+24 VDC Micro Line/Sensor Power Supply

+12 VDC Micro Line/Sensor Power Supply

MLPS2000

MLPS1000

ORDERING INFORMATION

UL Recognized Component,

File # E179259

Class BEN 55011

Emissions:

0.5 cycle

Criterion A

3 V/rms

Criterion A

EN 61000-4-6

EN 61000-4-11

RF conducted interference

Voltage dip/interruptions

1 kV L-L,

Criterion BEN 61000-4-5Surge

1 kV signal

2 kV power

Criterion AEN 61000-4-4Fast transients (burst)

1 kV signal

2 kV L&N-E power

10 V/m

Criterion AEN 61000-4-3Electromagnetic RF fields

8 kV air discharge

4 kV contact discharge

Criterion AEN 61000-4-2Electrostatic discharge

Immunity to Industrial Locations:

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

CAUTION: Risk of electric shock.

1 2

Inhaltsverzeichnis

Seite 1 - ORDERING INFORMATION

MLPS UNITMOUNTING CLIPEXISTING PANEL1.30 (33)AA.SEE APPROPRIATE LITERATUREBM3424BOUTPUT POWER:12VDC UNREG.  @ 400mAOPERATING TEMP: 0° TO 60°C85-250 V

Seite 2 - TROUBLESHOOTING

INSTALLATION ENVIRONMENTThe unit should be installed in a location that does not exceed the maximum operating temperature and provides good air circul

Verwandte Modelle: MLPS1

Kommentare zu diesen Handbüchern

Keine Kommentare

Red-lion MLPS2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Red-lion MLPS2 herunter. Red Lion MLPS2 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: MLPS1

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Red-lion MLPS2