Red-lion NT100 Bedienungsanleitung PDF herunterladen

GENERAL DESCRIPTION

The NT series is a range of compact IEEE 802.3 layer two network switches

with automatic speed, duplex and cable sensing. The series features ultra-robust

construction, capable of withstanding environmental extremes for use in mission

critical applications.

These affordable, Class I, Division 2 switches feature redundant power

inputs, hardened metal enclosures, and 16 kV port protection. Each switch is

capable of auto negotiating 10/100 Mb and half/full duplex communications.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

literature or on equipment must be observed to ensure personal safety and to

prevent damage to either the instrument or equipment connected to it. If

equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

For 108TX: Use 60/75°C rated copper wire, (0.22Nm) 2 inch-lbs. tightening

torque for field installed connectors.

For 104TX & 105TX: Use 95°C rated copper wire, (0.22Nm) 2 inch-lbs.

tightening torque for field installed connectors.

SPECIFICATIONS

1. POWER: 10-30 VDC

NT104TX/NT105TX: 215 mA max. @ 24VDC

NT108TX: 250 mA max. @ 24VDC

2. LEDs:

LED COLOR DESCRIPTION

ON Power is Applied.

OFF Power is OFF.

LNK/ACT

ON Link established, no Activity on cable.

BLINKING Link established, Activity on cable

OFF No link activity on cable.

SPD

ON Link is 100Mbps.

OFF Link is 10Mbs.

3. ENVIRONMENTAL CONDITIONS:

Operating Temperature Range:

NT104TX/NT105TX: -40 to +80 °C

NT108TX: -40 to +70 °C

Storage Temperature Range: -40 to +85 °C

Operating Humidity: 10-95%, non-condensing

Altitude: Up to 3000 meters.

4. CONSTRUCTION: Brushed aluminum housing

5. CONNECTIONS:

Power: Removable wire clamp screw terminal block.

Wire Gage Capacity: 28 AWG to 16 AWG

Torque: 2 in/lb (0.22 Nm)

Ethernet: RJ-45 UTP ports

6. MOUNTING: Snaps onto standard DIN style top hat (T) profile mounting

rail according to EN50022 -35 x 7.5 and -35 x 15.

7. CERTIFICATIONS AND COMPLIANCES:

UL Listed (N-Tron Incorporated, Part numbers 104TX, 105TX, 108TX. File

#E214222)

Safety: Suitable for use in Class I, Division 2, Groups A, B, C and D

Hazardous locations, or non-hazardous locations only.

Immunity to Industrial Locations:

EMI: EN61000-6-4, EN55011 - Class A

FCC Title 47, Part 15, Subpart B - Class A

ICES-003 – Class A

EMS: EN61000-6-2

EN61000-4-2 (ESD)

EN61000-4-3 (RS)

EN61000-4-4 (EFT)

EN61000-4-5 (Surge)

EN61000-4-6 (Conducted Disturbances)

8. WEIGHT:

NT104TX/NT105TX: 0.6 lbs. (0.27 Kg)

NT108TX0: 0.7 lbs. (0.31 Kg)

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

 UNMANAGED SWITCH REQUIRES NO CONFIGURATION

 SUPPORTS 10/100 MBPS NETWORKS

 AUTO HALF/FULL DUPLEX NEGOTIATION

 REDUNDANT POWER INPUTS

 AUTO-CROSSING DETECTION SUPPORTS STANDARD AND

CROSSOVER ETHERNET CABLES

Bulletin No. NT100-X

Drawing No. LP0871

Effective 06/11

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

MODEL NT100 SERIES – UNMANAGED INDUSTRIAL ETHERNET SWITCHES

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT

EQUIPMENT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA

IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS.

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF

COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I,

DIVISION 2

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT

UNLESS POWER HAS BEEN SWITCHED OFF OR AREA IS KNOWN TO BE

NON-HAZARDOUS.

LISTED

65SN

FOR USE IN HAZARDOUS LOCATIONS:

Class I, Division 2, Groups A, B, C, and D

or unclassified or non-hazardous locations only.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - SPECIFICATIONS

1GENERAL DESCRIPTIONThe NT series is a range of compact IEEE 802.3 layer two network switches with automatic speed, duplex and cable sensing. The seri

Seite 2 - Powered by

2POWEREither V1 or V2 can be connected to power for minimal operation. For redundant power operation, V1 and V2 plugs must be connected to separate DC

Seite 3 - ORDERING INFORMATION

3To remove the unit from the DIN rail, place a flat head screwdriver into the release clip found at the bottom of the unit, and apply downward force o

Seite 4 - LIMITED WARRANTY

4LIMITED WARRANTYThe Company warrants the products it manufactures against defects in materials and workmanship for a period limited to two years from

Kommentare zu diesen Handbüchern

Keine Kommentare

Red-lion NT100 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Red-lion NT100 herunter. Red Lion NT100 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Red-lion NT100