Red-lion CUB7 Bedienungsanleitung PDF herunterladen

DESCRIPTION

The CUB7P is an 8-digit miniature programmable counter with large 0.35

inch (8.90 mm) high digits. It has an LCD read-out available in Positive Image

Reflective, Negative Image Transmissive with yellow/green backlighting, or red

backlighting. Backlight units require an external 9 to 28 VDC power supply.

The CUB7P versions operate from a signal voltage of 10 to 300 V (AC 50/60

Hz or DC).

The CUB7P1 has a programmable prescaler that can be set for any value

between 0.0001 and 1.9999. The decimal point position can be set anywhere

from 0 (no D.P.) to 0.000000 or no Leading Zero Blanking. Both the prescaler

and DP selection are accessed using the front panel PGM and RESET push

buttons. See Programming for details. Note that the count, prescaler and DP

values will be lost if the battery is removed. See BATTERY INSTALLATION

for additional information.

The CUB7P counters use a CMOS LSI chip, mounted on a gold-plated

substrate, that is electrically connected by ultrasonic wire-bonding. Proven

micro-electronic assembly and manufacturing techniques provide these units

with the reliability and dependability required for industrial service.

The CUB7P series is housed in a lightweight, high impact plastic case with a

clear viewing window. The sealed front panel with the silicone rubber buttons

meets NEMA 4X/IP65 specifications for wash-down and/or dusty

environments, when properly installed.

SAFETY SUMMARY

All instructions that appear in the bulletin or on equipment, all safety related

regulations, and all local codes must be observed to ensure personal safety and

to prevent damage to either the instrument or equipment connected to it. If

equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

CAUTION: Read complete

instructions prior to installation

and operation of the unit.

CAUTION: Risk of electric shock.

O 3 (8 Digit 0.35") LCD DISPLAY OPTIONS (Reflective, Red

Transmissive, Yellow/Green Transmissive. 9 to 28 VDC power

supply required for versions w/ LED backlighting)

O AVAILABLE VOLTAGE INPUTS (10 TO 300 VAC/DC)

O PRESCALER FROM 0.0001 TO 1.9999

O SELECTABLE DECIMAL POINTS

O REPLACEABLE INTERNAL LITHIUM BATTERY PROVIDES UP

TO 6 YEARS OF UNINTERRUPTED OPERATION (Battery Included)

O WIRE CONNECTIONS VIA SCREW CLAMP TYPE TERMINALS

O FRONT PANEL AND REMOTE RESET INPUT

O NEMA 4X/IP65 SEALED FRONT BEZEL

O BOTH FRONT PANEL PROGRAM AND RESET BUTTONS ARE

INDIVIDUALLY ENABLED

MODEL CUB7P - PROGRAMMABLE ELECTRONIC 8-DIGIT COUNTER

DIMENSIONS In inches (mm)

Note: Recommended minimum clearance (behind the panel) for mounting clip installation

is 2.1" (53.4) H x 5.5" (140) W.

PANEL CUT-OUT

Bulletin No. CUB7P-C

Drawing No. LP0441

Released 5/06

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

BNL10000

CUB7P120

CUB7P110

CUB7P100

PART NUMBER

Counter; Positive Image Reflective

Counter, w/Yel-Grn Backlighting

Counter; w/Red Backlighting

Replacement 3 V Lithium BatteryBNL

VOLTAGE

INPUT

*CUB7P

DESCRIPTIONMODEL NO.

* Battery is included with unit.

ORDERING INFORMATION

1 2 3 4

Inhaltsverzeichnis

Seite 1 - ORDERING INFORMATION

DESCRIPTIONThe CUB7P is an 8-digit miniature programmable counter with large 0.35inch (8.90 mm) high digits. It has an LCD read-out available in Posit

Seite 2 - EMC INSTALLATION GUIDELINES

2SPECIFICATIONS1. DISPLAY: 8-digit LCD, 0.35" (8.90 mm) high digits.2. POWER SOURCE: Replaceable Internal 3.0 V lithium battery to provide upto 6

Seite 3 - BATTERY INSTALLATION

3Ferrite Suppression Cores for signal and control cables:Fair-Rite # 0443167251 (RLC #FCOR0000)TDK # ZCAT3035-1330ASteward #28B2029-0A0Line Filters fo

Seite 4 - BACKLIGHT OPTION

4RESET AND PROGRAM OPTIONSConnecting a wire from the RST EN (Reset Enable) or the HS (ProgramEnable) Input terminals to Common will enable the front p