Red-lion IAMS Bedienungsanleitung PDF herunterladen (Seite 18)

SETUP /

OPERATING THE FUNCTION KEYS

Documentation for routing diagram.

In general:

When setting up the IAMS devices, you will be guided through all parameters

and you can choose the settings which fit the application. For each menu

there is a scrolling help text which is automatically shown in line 3 on the

display.

Setup is carried out by use of the 3 function keys:

1 will increase the numerical value or choose the next parameter

2 will decrease the numerical value or choose the previous parameter

3 will save the chosen value and proceed to the next menu

When setup is completed, the display will return to the default state 1.0.

Pressing and holding

3 will return to the previous menu or return to the default

state (1.0) without saving the changed values or parameters.

If no key is activated for 1 minute, the display will return to the default state

(1.0) without saving the changed values or parameters.

Further explanations:

Fast setpoint adjustment and relay test: These menus allow you to make a

quick setpoint change and relay test when the FastSet menu is activated.

This function can only be activated when the relays are set for setpoint

function and are controlled by a setpoint.

Pressing

1 and 2 simultaneously will activate a relay test and change the

state of the relay.

Pressing

3 will save the setpoint change.

Holding down

3 for more than 1 second will return the unit to the default state

without saving the setpoint change.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 85 86

Keine Kommentare

Red-lion IAMS Bedienungsanleitung Seite 18