Red-lion IAMS Bedienungsanleitung PDF herunterladen (Seite 2)

SPECIFICATIONS

1. DISPLAY: See Display/ Programming Module

2. POWER:

AC Power: 21.6 to 253 VAC, 50/60 Hz

DC Power: 19.2 to 300 VDC,

3. CONSUMPTION: <2.5 W

4. FUSE: 400 mA SB/250 VAC

5. ISOLATION: Between input, supply and outputs - 2.3 kVAC/250 VAC

6. INPUTS:

Current Input:

Programmable Ranges: 0 to 20 and 4 to 20 mA DC

Measurement range: 0 to 20 mA DC

Input resistance: Nom. 20 Ω + PTC 50 Ω

Sensor error detection: 4 to 20 loop break, yes

Supply Voltage: 16-25 VDC, 20 mA max (Terminal 43 and 44)

Voltage Input:

Programmable Ranges: 0 to 1, 0.2 to 1, 0 to 5, 1 to 5, 1 to 10, and 2 to 10

VDC

Measurement range: 0 to 12 VDC

Input resistance: Nom. 10 MΩ

Thermocouple Inputs:

Thermocouple Type: B, E, J, K, L, N, R, S, T, U, W3, W5, and LR

Cold Junction Compensation: via internally mounted sensor < ±1.0 ºC

Sensor Error Detection: All TC types, yes

Sensor Error Current: 2 µA nominal, 0 µA = error detected

RTD, Linear Resistance, Potentiometer Inputs

RTD Types: Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500,

Pt1000, Ni50, Ni100, Ni120, and Ni1000

Cable Resistance per wire: RTD, 50 Ω max.

Sensor Current: RTD, Nom. 0.2 mA

Sensor Error Detection: RTD, yes

Short Circuit Detection: RTD, < 15 Ω

7. STEP RESPONSE TIME: (0 to 90% or 100 to 10%)

Temperature input: ≤ 1 sec

Current/Voltage input: ≤ 400 msec

8. ACCURACY: The greater of the general and basic values.

GENERAL VALUES

Input Type Absolute Accuracy Temperature Coefficient

All ≤ ±0.1% of span ≤ ±0.1% of span/°C

BASIC VALUES

Input Type Basic Accuracy Temperature Coefficient

mA ≤ ±4 µA ≤ ±0.4 µA/°C

Volt ≤ ±20 µV ≤ ±2 µV/°C

Pt100 ≤ ±0.2 °C ≤ ±0.01 °C/°C

Lin. R

≤ ±0.1 Ω ≤ ±0.01 Ω/°C

Potentiometer

≤ ±0.1 Ω ≤ ±0.01 Ω/°C

TC Type:

E, J, K, L, N, T, U

≤ ±1 °C ≤ ±0.5 °C/°C

TC Type: B, R, S,

W3, W5, LR

≤ ±2 °C ≤ ±0.2 °C/°C

9. CALIBRATION TEMPERATURE: 20 to 28 ºC

10. RELAY OUTPUTS: Dual Form A. Contacts rated at 2 A AC or 1 A DC

Hysteresis: 0.1 to 25 % of span or display range

On and off delay: 0 to 3600 sec

Sensor Error Detection: Break / Make / Hold

Max. Voltage: 250 Vrms

Max. Current: 2 A AC or 1 ADC

Max. Power: 500 VA

11. ANALOG OUTPUT:

Current Output:

Signal Range (Span): 0 to 20 mA

Programmable Measurement Range: 0 to 20, 4 to 20, 20 to 0, and 20 to 4 mA

Load Resistance: 800 Ω max.

Output Compliance: 16 VDC max.

Load Stability: = 0.01 % of span, 100 Ω load

Sensor Error Detection: 0 / 3.5 mA/ 23 mA / none

Output Limitation:

For 4 to 20 and 20 to 4 mA signals: 3.8 to 20.5 mA

For 0 to 20 and 20 to 0 mA signals: 0 to 20.5 mA

Current Limit: ≤ 28 mA

Voltage Output:

Signal Range: 0 to 10 VDC

Programmable Signal Ranges: 0 to 1, 0.2 to 1, 0 to 10, 0 to 5, 1 to 5, 2 to

10, 1 to 0, 1 to 0.2, 5 to 0, 5 to 1, 10 to 0, and 10 to 2 V

Load: 500 K Ω min

12. ENVIRONMENTAL CONDITIONS:

Operating Temperature: -20 to +60 ºC

Operating and Storage Humidity: 95% relative humidity (non-condensing)

13. CERTIFICATIONS AND COMPLIANCES:

ELECTROMAGNETIC COMPATIBILITY:

EMC 2004/108/EC Emission and Immunity EN 61326

EMC Immunity Influence <± 0.5% of span

Extended EMC Immunity: NAMUR NE 21,

A criterion, burst <± 1% of span

SAFETY

LVD 2006/95/EC EN 61010-1

Factory Mutual Approved, Report #3034432, FM 3600, 3611, 3810, and

ISA 82.02.01

FM, applicable in: Class I, Div. 2, Group A, B, C, D

Class I, Div. 2, Group IIC

Zone 2

Max. ambient temperature for T5 60°C

UL Listed, File # E324843, UL508, CSA C22.2 No. 14-M95

LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards

14. CONSTRUCTION: IP 50/IP20 Touch Safe, case body is black high impact

plastic. Pollution Degree 1.

15. CONNECTIONS: High compression cage-clamp terminal block. Use

60/75°C copper conductors only.

Wire strip length: 0.3” (7.5 mm)

Wire gage: 26 – 14 AWG stranded wire

Torque: 4.5 inch-lbs (0.5 N-m) max

16. WEIGHT: 5 oz (145 g)

5.6 oz (160 g) with programming module

TYPE MIN. VALUE MAX. VALUE STANDARD

B +400 °C +1820 °C IEC 60584-1

E -100 °C +1000 °C IEC 60584-1

J -100 °C +1200 °C IEC 60584-1

K -180 °C +1372 °C IEC 60584-1

L -200 °C +900 °C DIN 43710

N -180 °C +1300 °C IEC 60584-1

R -50 °C +1760 °C IEC 60584-1

S -50 °C +1760 °C IEC 60584-1

T -200 °C +400 °C IEC 60584-1

U -200 °C +600 °C DIN 43710

W3 0 °C +2300 °C ASTM E988-90

W5 0 °C +2300 °C ASTM E988-90

LR -200 °C +800 °C GOST 3044-84

INPUT TYPE MIN. VALUE MAX. VALUE STANDARD

Pt100 -200 °C +850 °C IEC60751

Ni100 -60 °C +250 °C DIN 43760

Lin. R 0 Ω 10000 Ω -

Potentiometer 10 Ω 100 kΩ -

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Red-lion IAMS Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Red-lion IAMS